Alumina Carriers

Besides the various phases – α, θ, γ, and amorphous activated alumina are all available from our portfolio – it’s in particular the incredible versatility of alumina with respect to shaping processes as well as the material’s key properties, such as density, porosity, or pore structures, which account for its outstanding position among the established catalyst carrier materials.

This, combined with the great global abundance of suitable raw materials, which lays the fundament for beneficial economics of a large bulk production, makes alumina a perfect first choice as a potential carrier for any new catalyst development project.

There are various ‘standard’ series within our portfolio, which are utilized for typical industrial catalysts in the chemical or petrochemical industry. Nevertheless, we always encourage our customers to make full use of this unique versatility of alumina and to use such ‘standards’ as an initial starting base to jointly develop a tailor-made solution, which tweaks the properties of a specific catalyst to the ultimate performance.

Click to download technical sheets:

GO TO DOWNLOAD

Explore our alumina portfolio:

 

As a basis for all EX/Axxx series we usually employ high purity raw materials. A typical chemical ‘standard’ profile of a respective carrier is

Al2O3 min. 99.5%
Na max. 300 ppm
Si max. 300 ppm
Fe max. 200 ppm

However, note that Exacer acts independently from any major alumina raw material suppliers and will always try to take the best choice for a customer’s specific project.
For particular applications, which demand still higher purities (e.g., very low sodium), we can improve the chemical profile further by a careful selection of appropriate raw materials. There is a ‘high purity’ (HP) and an ‘ultra-high-purity’ (UHP) series existing. If you want to understand more of the details and the underlying specifications, please kindly contact us and share the particular purity needs for your specific process!

Write us

 

 

EX-Axxx/E-series

Download leaflet 

Our EX-Axx/E extrudate series is the perfect ‘construction kit’ basis for any process that requires a tailor-made solution, particularly with view on the pore size distribution.


Shapes

The shaping for this series is particularly versatile. While cylindrical 3 and 4 mm extrudates are a well-established standard in industry, a lower diameter (could be as small as 1 mm) is a typical strategy to increase the surface/bulk-ratio in your fixed bed.
If a customer strives to achieve an even superior combination of body size, outer surface area, pressure drop and bulk density, it may be necessary to stretch out to more advanced shapes, such as rings, trilobes, quadrilobes and many other shapes – and our EX-Axx/E-series is the perfect basis for such developments.

Surface Area & Pore Distribution
The BET surfaces area and the pore structure of this carrier series are versatile as well. On the one end there are microporous structures, predominantly consisting of γ-alumina, with a surface area of up to 250 m²/g and high pore volumes of up to 1 ml/g., on the other end there are pure α-alumina carriers, with strongly reduced Lewis acidity and high chemical resistance towards the outer media, which have surfaces as small as 1 m²/g, but still an impregnation volume of more than 0.4 ml/g.
Also, all intermediate types of alumina phases and respective surface areas are available. Frequently used industrial standards are for example α/θ-mixtures with around 30-40 m²/g or θ/γ-mixtures around 70 – 120 m²/g, which are, e.g., applied in selective hydrogenation processes. See also some typical examples in our respective leaflet.

There are also several options to fine-tune the pore structure for the EX-Axx/E-series: Mono-, bi-, or multi-modal distributions – please ask for the pore size distribution that is particularly required in order to achieve the best selectivity for your process!

Download leaflet 

 

The strategy to add large pores to the carrier cannot just be used to improve the internal diffusion transport within a catalyst particle. If one drives this peculiarity to the extreme, it becomes even possible to boost the accessible outer surface area for fast gas phase reactions, that are limited mainly to the geometric surface of a catalyst.

 

Mechanics
While modelling the outer shape and inner pore texture, one of the main challenges is to maintain good mechanical properties. A carrier particle needs to withstand transport, impregnation, and the final filling processes without losing its integrity. Therefore, we always strive to drive the attrition to the technical achievable minimum value, which for our extrudates is often better than those of the industrially wide-spread ‘standard’ alumina-beads, which are often just chosen for historical reasons.
Also, the crush strength can be a crucial parameter for large fixed beds of catalyst. Our EX-Axxx/E-series shows outstanding strength in spite of the high porosity and the low material density that can be achieved – see also examples in our download section!

Challenge us and send us your mechanical request!

Write us

 

 

 

EXAct Spheres (EX-Axxx/S-series)

Download leaflet 

The manufacturing of our EXAct spheres is an exciting new process to create a spherical support with unique properties. It combines several outstanding advantages and overcomes specific weaknesses of typical ‘standard’ alumina beads, which are usually prepared by agglomeration processes. This series could be a perfect choice if the ‘standard’ alumina beads are considered to be not sufficient for a process and extrudates cannot be applied.

Our EXAct spheres are based upon the same raw materials as the other EX-Axxx series, hence identical purities are feasible (see top section), but the shaping process is done in a unique, proprietary process.

 

A unique combination of properties

  • The uniform size (standard deviation << 5%!) accounts for a high void fraction (often >40%) and thus for a much lower pressure drop and more uniform flow distribution in the catalyst packing, when compared to ‘standard’ alumina beads. Currently available standard sizes are 3.5, 4 or 5 mm spheres.
  • Other than agglomerated beads, which are manufactured in a layer-wise manner that can cause significant density inhomogeneities across the particle’s diameter and may negatively influence the distribution of active metals, our spheres are absolutely homogeneous along the cross section.
  • Particularly for low surface areas, the EXAct Spheres shows outstanding mechanical properties (low attrition & high hardness).
    There is a huge versatility for alumina phases, BET-surface area, porosity and pore size distributions – very similar to the possibilities that exist for extruded carriers. In particular it is possible to enhance our spheres with extra transport pores in order to mitigate diffusion processes.
  • If desired, very low bulk densities of around 500 g/l can be achieved, which gives beneficial economic effects to many catalyst projects.

If this new carrier type has raised your curiosity, please contact us to ask for a sample!

Write us

 

 

Tableted Alumina – EX-Axxx/T-series

Download leaflet 

 

Tableted alumina bodies unlock a new world full of different shapes, that adapt to your particular process requirements – starting from simple cylindrical tablets (e.g., 3×3 or 4×4 mm) and also more complex shapes like rings or spheres are available.
Though in general 3×3 mm tablets are found frequently in the market, due to the (relative) ease of their preparation, there is not really an industrial standard existing. Most carriers are made according to the specific needs of the customer with respect to outer dimensions, pore size distribution, BET surface area, purity and other parameters.
Besides the use as a carrier for impregnation processes, such tableted alumina supports are sometimes also used as inert cores for coated catalysts or as a diluent in highly exothermic reactions. Please check also out the respective leaflets (-> link to leaflets ‘coating carriers’ and ‘hot spot reducers’).
Please kindly let us know your particular challenges to jointly develop the perfect solution for your individual process! (-> link to request form).

 

Write us

 

 

Alumina Beads – EX-Bxxx/S-series

Download leaflet 

 

 

For economically challenging applications Exacer also provides a series of ‘simple’ alumina supports, that are created in a ‘snowballing’ process and have a fair purity (Na2O is typically in the range of 1000 – 1500 ppm). Typical standard sizes are around 3, 4, and 5 mm diameter and there is a certain flexibility to match particular customer needs. The surface area can be greatly varied, starting from more the 300 m²/g and down to far below 10 m²/g, still with a reasonable porosity and good mechanics.

Please contact us to find out more about this complimentary carrier series!

Write us